Rigging Safety Check

Technician Name*

Checking Technician Name - To confirm rigging is completed to the correct standard*

Current Number*

Total weight of equipment inc - chain blocks & trussing & rigging equipment (kg) on each fixing point ( Multiple Loads Should be Noted )*

SEE LINK AT THE TOP OF THE PAGE FOR GUIDANCE

Total load capacity of each fixing points (kg) ( Multiple Loads Should be Noted )*

Load/Weight between each suspension point is within design limits of the truss ( Please indicate the load (KG) on each span multiple loads should be noted )*

What is the Manufacturer's Centre Load Limit ( Multiple Loads Should be Noted )*

Marquee clamps, if used, are installed according to rigging procedures and are securely fixed and tightened*

Yes
No

Slinging positions on the truss are at the node points and all shackles are checked and closed*

Yes
No

Girder clamps and ceiling clamps, if used, are all installed according to rigging procedures and are securely fixed and tightened*

Yes
No

Ensure any eye bolts are securely fixed and tightened to clamp trussing*

Yes
No

Ensure and check all lighting and other fixtures on the truss are securely fixed and all have safety cables attached*

Yes
No

Ensure chains are hanging vertically to the ground from rigging points and are not at an angle*

Yes
No

Additional backup slings have been attached correctly to all available fixing points*

Yes
No

Ensure any equipment attached to rigging has the correct attachments and adequate safety cables installed*

Yes
No

Ensure there are no tools or loose equipment left on the truss which may fall off*

Yes
No

I can confirm I have attached photos of all the rigging points to the current job - showing everything is correctly installed and evidence supporting this*

Yes
No

Technician confirmation statement - State full name*

I confirm I have installed and checked all the above equipment and rigging points as per the safe rigging procedure and confirm that it is safe and secure to the best of my knowledge

Checking technician confirmation statement - State full name*

I can confirm I have checked my colleagues work and checked all the above equipment and rigging points as per the safe rigging procedure and confirm that it is safe and secure to the best of my knowledge

Additional Information

Please include any additional information including problems and notes for the directors here

Name

This field is for validation purposes and should be left unchanged.